Turbosound TQ-315DP ユーザーズマニュアル

A versatile range of mounting hardware is available that allows enclosures to be used in a variety 
of ways, in either mobile applications or permanent installations. 

A top hat stand type fitting is mounted in the base of 
QLight™ series cabinets for use with 35mm diameter 
loudspeaker stands with a load rating of at least 37kgs 
(82lbs). 

Pole mount sockets are also fitted to the top of QLight™ 
series subwoofers. This allows these two enclosures to be 
used together as an extended frequency range system as 
shown with the TQ-445DP mounted above the TQ-425DP. 
An optional 35mm diameter straight pole used between 
these enclosures enables a minimum footprint and ensures 
the correct vertical distance between cabinets. 

 

 

 

Internal metric threaded rigging points are provided 
on the TQ-445DP cabinet enabling it to be flown using 
optional M10 shoulder eyebolts. Downward 
inclination of the enclosure can be adjusted using an 
additional rigging point on the rear of the cabinet. 
Note: these rigging points must NOT be used to rig a 
second enclosure in a vertical column. 

Side-mounted flying strips can be fitted to the sides 
of the TQ-445DP enclosure by removing the 
countersunk bolts on the top and sides of the cabinet 
and replacing them with the M10 bolts supplied with 
the hardware. Two flying strips are required for each 
enclosure; one attached to each side. This method 
offers a simple and cost effective method of flying 
single enclosures in permanent installations. 
Enclosures may be arranged in a vertical column by 
coupling the flying strips together using QL-75