Toshiba 40UL605U ユーザーズマニュアル
Chapter 9: Troubleshooting
74
No network connection
•
The LAN cables are not connected properly or at
all. Connect all cables ( pages 22–23).
all. Connect all cables ( pages 22–23).
•
Make sure the modem’s power cord is plugged in.
•
Make sure your network address is set up
correctly ( “Setting up the Network”).
correctly ( “Setting up the Network”).
Network Setup fails (Auto)
•
The LAN cables are not connected properly or at
all. Connect all cables.
all. Connect all cables.
•
The DHCP service is not enabled on the router,
or no router is present. Refer to your router’s
documentation for instructions on enabling
DHCP. If you do not have a router, you must
manually set up the network address.
or no router is present. Refer to your router’s
documentation for instructions on enabling
DHCP. If you do not have a router, you must
manually set up the network address.
•
Internet service is not available. Check your
cable/DSL modem or contact your ISP for
Internet service issues.
cable/DSL modem or contact your ISP for
Internet service issues.
Network Setup fails (Manual)
•
The TV IP address is the same as the networked PC’s.
The TV IP address must be different from the PC’s IP
address.
The TV IP address must be different from the PC’s IP
address.
•
The TV IP address is not on the same subnet as
the networked PC’s. For example, if the PC has
IP 192.168.0.100 with netmask 255.255.255.0,
and the TV has IP 192.168.0.200 with netmask
255.255.255.0, then they are both on same subnet.
Conversely, if the PC has IP 192.168.1.100
with netmask 255.255.255.0, and the TV has IP
192.168.0.200 with netmask 255.255.255.0, then they
are on DIFFERENT sub-nets.
the networked PC’s. For example, if the PC has
IP 192.168.0.100 with netmask 255.255.255.0,
and the TV has IP 192.168.0.200 with netmask
255.255.255.0, then they are both on same subnet.
Conversely, if the PC has IP 192.168.1.100
with netmask 255.255.255.0, and the TV has IP
192.168.0.200 with netmask 255.255.255.0, then they
are on DIFFERENT sub-nets.
Unstable network connection
•
Unplug the Ethernet cables, and then connect
them again.
them again.
The “Server” name is not displayed
•
The LAN cables are not connected properly or at
all. Connect all cables ( pages 22–23).
all. Connect all cables ( pages 22–23).
•
The network setup on the Server is incorrect.
Make sure both the Server and TV are using the
same network type (DHCP/manual) and have
compatible network settings.
Make sure both the Server and TV are using the
same network type (DHCP/manual) and have
compatible network settings.
•
Too many sharing devices are connected. You
cannot connect more than 32 sharing devices at
one time.
cannot connect more than 32 sharing devices at
one time.
Wireless network problems
•
Make sure the Dual Band WLAN Adapter
connection ( page 23).
connection ( page 23).
•
Check that the power of AP is On.
•
After starting wireless network setup, confirm
that the window that the wireless constitution
was completed successfully appears.
that the window that the wireless constitution
was completed successfully appears.
•
Check the AP’s connection status ( page 68).
•
If the AP does not correspond to the PBC of
WPS, Easy Setup (PBC) cannot set even if its
push-button is pressed.
WPS, Easy Setup (PBC) cannot set even if its
push-button is pressed.
•
If AP list is not displayed in Easy Setup (PIN)
or Assisted Setup, the power of AP may be Off.
Check that it is On, and then try starting the AP
scan.
or Assisted Setup, the power of AP may be Off.
Check that it is On, and then try starting the AP
scan.
•
Read the AP’s instruction manual.
Media Player problems
•
Make sure that devices are connected correctly.
•
Incorrect behavior may occur with a USB HUB
connection.
connection.
•
A size of pictures stored in the DLNA recognition
server may be automatically changed by the
DLNA recognition servers end and displayed.
server may be automatically changed by the
DLNA recognition servers end and displayed.
•
Photo files that was processed and edited by
using the PC’s application software may not be
able to be viewed.
using the PC’s application software may not be
able to be viewed.
•
The TV may select one format automatically and
play it when contents that support two or more
formats are played.
play it when contents that support two or more
formats are played.
•
Copyright protection contents stored in the
DLNA recognition server may not be able to be
played.
DLNA recognition server may not be able to be
played.
•
Contents may not be played with stability
by traffic (degree and congestion of the data
transmission) on the network etc.
by traffic (degree and congestion of the data
transmission) on the network etc.
•
Contents that PC originally recorded may not be
able to be played correctly.
able to be played correctly.
•
Set the access limitation of the DLNA recognition
server correctly according to the manual of the
DLNA recognition server.
server correctly according to the manual of the
DLNA recognition server.
•
Confirm contents of the DLNA server and the
USB storage device are formats that correspond
with this TV ( page 54 and page 56).
USB storage device are formats that correspond
with this TV ( page 54 and page 56).
•
Depending on the DLNA recognition server, it
may take time to display the list.
may take time to display the list.
•
Depending on the DLNA recognition server, the
access may be limited by the MAC address. Set
it correctly according to the DLNA recognition
server’s manual. This TV’s MAC Address can be
confirmed at
access may be limited by the MAC address. Set
it correctly according to the DLNA recognition
server’s manual. This TV’s MAC Address can be
confirmed at
MAC address ( page 70).