Toshiba 19SLV411U ユーザーズマニュアル

Using the panel lock feature

You can lock the control panel to prevent your
settings from being changed accidentally (by
children, for example). When the

Panel Lock is On,

none of the controls on the TV control panel will
operate except

POWER.

Press

and highlight the

Locks menu icon.

Press q to display the PIN code entering screen.

Enter your four-digit PIN code and press

.

Press q to highlight

Panel Lock.

Press u to select

On. When the control panel

is locked and any button on the control panel
(except

POWER) is pressed, the message “NOT

AVAILABLE” appears.

Select

Off in step 5 above, or press and hold the

VOLUME – button on the TV control panel for about

10 seconds until the volume icon appears.

Using the PC settings feature

You can view an image from a PC on the TV screen.
When a PC is connected to the TV's PC IN terminal,
you can use the PC Settings feature to make
adjustments to the image. If the edges of the picture are
cut off, readjust the

Horizontal Position and Vertical 

Position. If the picture is affected by interference,

readjust the

Clock Phase and Sampling Clock.

Repeatedly press

INPUT

to select PC input mode (

“Selecting the video input source to view” page 30).

Press

and open the

Setup menu.

Highlight

PC Settings and press

.

Press p or q to highlight the item you want to adjust.

Press t or u to make the appropriate adjustments.

Horizontal

Position

Moves the picture left/right. The adjustment

range is within ±10 from center.*

Vertical

Position

Moves the picture up/down. The adjustment

range is within ±10 from center.*

Clock
Phase

Helps to reduce noise and sharpen the

picture. The adjustment range is within

±16 from center.*

Sampling
Clock

Helps to reduce noise and minimize

periodic vertical stripes on the screen.

The adjustment range is within ±10

from center.*

Reset

Highlight this item then press

to get

an optimum adjustment automatically.

* The default settings may vary depending on

the input signal format.

Setting the PC Audio

This function allows you to output or mute the sound

from your PC when connecting using the PC IN

terminal and an analog RGB cable. ( page 20)

Press

and open the

Sound menu.

Highlight

Audio Setup and press

.

Press p or q to select

PC Audio and then press

t or u to select

No or Yes.

Yes: When viewing the PC input, the audio from

the PC Audio input can be heard.
No: When viewing the PC input, there will be no audio.
Note: