Technicolor - Thomson DP50747 ユーザーズマニュアル
38
MENU OPTION—
CHANNEL SCAN MEMORY
Cannot select or scan some
channels.
channels.
Channels may be removed from
memory.
memory.
Check antenna connections.
NO digital signal being broadcast.
Weak Signal.
V-Guide is set to block program-
ming.
ming.
Select Channel Scan memory and
manually add channels or start an
“All Channel Search.”
manually add channels or start an
“All Channel Search.”
Turn antenna, install signal
booster.
booster.
Set V-Guide to “Off” or press
RESET key to clear all settings and
restart channel search.
RESET key to clear all settings and
restart channel search.
HELPFUL HINTS (PROBLEMS/SOLUTIONS)
SYMPTOM
CHECK THESE CONDITIONS
TRY THESE SOLUTIONS
If you continue to experience problems, please call toll free
1-800-877-5032. We can Help!
3
Use the CHANNEL (CH
) keys or numerical
0 ~ 9 keys to select desired channel.
4
Press the ENTER key to add the channel. The
display will change to “added.”
display will change to “added.”
1
Press the MENU key to display the Main menu.
2
Use the CURSOR
keys to highlight Channel
Scan Memory. Press ENTER.
ADDING DIGITAL OR ANALOG
CHANNELS TO MEMORY
CHANNELS TO MEMORY
Channel Scan Memory is a list of active channels that
you can scan through using the Channel Scan CH
you can scan through using the Channel Scan CH
(up) CH
(down) keys. This list can be customized by
deleting and/or adding channels.
After 3 seconds the TV screen will display
“Delete?”
“Delete?”
OPERATING TIP:
If one digital sub-channel is added back to the
Channel Scan Memory list, all of that channel’s
sub-channels will be added back.
Channel Scan Memory list, all of that channel’s
sub-channels will be added back.