Viewsonic VS13772-1M ユーザーズマニュアル

3

ViewSonic                                                                                          VT3210LED/VT4210LED 

The LED TV can be used in a free standing or wall-mounted position. Before installing the product to the 
wall, please consider the following guidelines:

• 

Read the Important Safety Instructions, at the start of this manual.

• 

Do not install in a moist or wet environment. This equipment is intended for indoor use.

• 

Do not install near heat source, or strong magnetic fields.

• 

Use only UL approved wall-mounting brackets to support the LED TV weight.

• 

Before attaching the wall mount plate to the back cover, ensure the product is working.

• 

If your LED TV is already set up for free-standing operation, you need to first remove the stand before 
mounting the device to the wall.

To attach the wall-mount bracket to LED TV safely, please use the following guidelines:

• 

Disconnect the power and any other cables that might hinder moving the LED TV.

• 

Set the LED TV on a table or work surface, placing the screen face down on a towel or woolen blanket to 
protect the screen surface from damage while installing plate.

• 

Before installing the LED TV on the wall, ensure you have recorded the product serial number on page (i) 
of the User Guide, as you will need the serial number to request service should there be a service need.

• 

Install the wall mount plate to the LED TV using screws NO LONGER than 10mm, as longer screws 
found in universal (non-ViewSonic) wall mount kits may damage the power supply causing the unit to 
fail. The wall-mount screw type is M6 x L13 or M6 x L10.

• 

Mount the wall mount bracket to the wall ensuring use of proper screws to support the installation. 
Ensure there is at least 3 cm of space surrounding any air-vents of your LED TV to allow adequate 
cooling during operation. 

• 

Hang the LED TV wall mount plate to the wall mount bracket, completing installation.  
Enjoy your ViewSonic LED TV!