3D Connexion ZT1000 ユーザーズマニュアル

28 

Troubleshooting and Diagnostics 

zt1100/xz200 and xt1500 Series 

 

 

Troubleshooting and Self-Repair Guide 

•  If the notebook’s hard disk drive frequently runs (as indicated by the hard drive light on the front 

of the notebook) while the notebook appears to be paused or running slowly, Windows is likely 
spending excess time writing to its swap file on the notebook’s hard disk. Consider installing 
additional memory. 

•  Check the amount of available free disk space. Delete temporary and unneeded files. 

•  Press Ctrl+Alt+Del to end the application that is not responding. 
•  Reset the notebook—see “Resetting the Notebook” on page 13. 

•  Battery power is probably extremely low. Plug in the AC adapter or insert a charged battery. 

•  The notebook beeps repeatedly when battery power is low (you can set this option in Power 

Options in Control Panel). Save your work, turn off the notebook immediately, and insert a 
charged battery or plug in the AC adapter. 

•  Make sure that the AC adapter is fully plugged into the power source and the notebook, and that 

the light on the adapter is on. 

•  If you’re using a power strip, unplug the AC adapter from the power strip and plug it directly into 

a wall outlet. 

•  Make sure the battery is fully installed and locked in place. 
•  Move the notebook away from any nearby heat source. Unplug the AC adapter and allow the 

battery to cool down. If the battery gets too hot, it will not charge properly. 

•  If available, try another battery and AC adapter. 

•  Turn down the display brightness. 
•  Check the timeout settings in Power Options in Control Panel. 
•  If you are running an application that has an automatic save feature (such as MS Word), disable 

this feature or increase the specified save time to reduce hard disk access. 

•  PC card use and heavy modem use can affect battery operating time.