3D Connexion ZT1000 ユーザーズマニュアル

zt1100/xz200 and xt1500 Series 

Removing and Replacing Parts 

49 

Troubleshooting and Self-Repair Guide 

4.  Raise the top of the keyboard, then lift the keyboard up and out of the notebook. 

5. Lay the keyboard face down on the top case, forward of its normal position, and disconnect the 

ribbon cable from the motherboard. 

 

Do not touch the metal surfaces inside the notebook until they have cooled off. They could 
be very hot if the notebook was running recently. 

 

 

•  Lay the keyboard face down on the top case, forward of its normal position, and reconnect the 

ribbon cable. 

•  Slip the metal tabs on the bottom of the keyboard into their slots in the top case, then lower the 

keyboard into place.