Avaya P333R-LB ユーザーズマニュアル
Chapter 17
Maintenance
70
Avaya
P333R-LB User’s Guide
Saving Configuration Definitions
1
Turn off the power supply.
2
Remove an expansion sub-module.
3
Insert another expansion sub-module.
4
Turn on the power supply.
Without Saving Configuration Definitions
1
Loosen the screws by turning the knobs.
2
Take hold of the two knobs (one near each side of the front panel) and pull
gently but firmly towards yourself.
gently but firmly towards yourself.
3
Insert another expansion sub-module or the blanking plate.
Replacing the Stacking Sub-module
To replace the X330STK stacking sub-module:
1
1
Power to the switch may remain on.
2
Loosen the screws to the stacking sub-module by turning the knobs.
3
Take hold of the two knobs (one near each side of the front panel) and pull
gently but firmly towards yourself.
gently but firmly towards yourself.
4
Insert the new stacking sub-module gently into the slot, ensuring that the metal
base plate is aligned with the guide rails.
The metal plate—not the PCB of the X330STK— fits onto the guide rails.
base plate is aligned with the guide rails.
The metal plate—not the PCB of the X330STK— fits onto the guide rails.
5
Press the sub-module in firmly until it is completely inserted into the
Avaya P330.
Avaya P330.
Caution:
Ensure that the screws on the module are properly aligned with the holes
in the chassis before tightening them.
6
Gently tighten the two screws on the side panel of the stacking module by
turning the screws. Do not use excessive force when tightening the screws.
turning the screws. Do not use excessive force when tightening the screws.