VIZIO E472VLE ユーザーズマニュアル

To connect to a wireless network whose network name (SSID) is

not being broadcast:

1. Press the MENU button on the

remote. The on-screen menu is

displayed.

2. Use the Arrow buttons on

the remote to highlight the

Network icon and press OK.

The Network Connection menu

is displayed.

3. Highlight Enter Access Point

Name and press OK.

4. Using the on-screen keyboard,

enter your network’s name

(SSID), then highlight Connect

and press OK.

5. Using the on-screen keyboard,

enter your network’s password,

then highlight Connect and

press OK.

6. Press the EXIT button on the

remote.

Changing the Advanced Network Settings
Advanced users can fine-tune the network settings using the

Manual Setup feature.

To change advanced network settings:

1. From the Network Connection

menu, highlight Manual Setup

and press OK. The Change

Settings menu is displayed.

2. Use the Arrow and OK buttons

to adjust each setting:
• DHCP - (Dynamic Host

Configuration Protocol) This

setting must be turned Off

to change any of the other

settings.

• IP Address - The IP address

assigned to the TV.

• Subnet Mask - The subnet

mask.

• Default Gateway - Your

network’s default gateway

address.

• Pref. DNS Server - Your

preferred domain name

server address.

• Alt DNS Server - Your alternate domain name server

address.

3. If you need the RJ45 (ethernet) MAC address or the Wireless

MAC address to set up your network, these are displayed at

the bottom of the Change Settings menu.

4. Press the EXIT button on the remote.