VIZIO VP50 HDTV20A ユーザーズマニュアル

VIZIO VP50 HDTV20A User Manual 

Version 12/28/2007 

27 

 

www.VIZIO.com 

        

 

 

 

 

 

 

 

1. 

Turn off the power to the LCD HDTV 
and Receiver/Amp. 

2. 

Using an audio cable (white and red 
connectors), connect the cable to the 
audio input connectors on the 
Receiver/Amp and connect the other 
end to the ANALOG OUT (white 
area) audio connectors at the rear of 
the LCD HDTV. 

3. 

Turn on the power to the LCD HDTV 
and Receiver/Amp. 

4. 

Then press the MENU button on the 
remote control to open the On-
Screen Display (OSD) menu. 

5. 

Press the       button on the remote control to select the Audio Adjust menu. 

6. 

Press the        button on the remote control to select SPEAKERS. 

        7.        Press the        button on the remote control to select OFF so that the sound from the LCD 

HDTV will now be routed through your Receiver/Amp system. 

                     Press either the 

MENU key to return to the previous menu display or the EXIT key to return 

to your program if task has been completed.   

                   

Note: 

a) 

Refer to your Receiver/ Amp user manual to select the corresponding audio input. 

b) 

The audio output is not amplified and can not be connected directly to external 
speakers. 

 

 

 

  

If your sound system has a SPDIF (optical) digital audio input you can connect it to the optical DIGITAL 
AUDIO OUT (gray area) at the rear of the Plasma HDTV.  This is active when receiving digital audio with 
the programs from the DTV/TV CABLE/ANTENNA input.