VIZIO D28h-C1 ユーザーズマニュアル

6

Installing the TV on a Wall
To mount your TV on a wall, you will need a wall mount. Consult 

the information below to find the appropriate mount for your TV 

model:

Installing a TV on a wall requires lifting. To prevent 

injury or damage to the TV, ask someone to help you.

Do not use the screws that come installed in the back 

of the TV to attach the TV to a wall mount. They are too 

short to support the TV and are intended only to secure 

the back panel and to improve sound quality.

Screw Size:

M4 (not included)

Hole Pattern:

100 mm (V) x 100 mm (H)

Weight w/o Stand:

Be sure the mount you choose is capable of supporting the weight 

of  the  TV.  After  you  have  determined  that  you  have  the  correct 

mount for your TV, you can begin the installation.

To install your TV on a wall:

1.  Read the instructions that came with your wall mount and 

make sure that you have four (4) screws of the correct length 

for the combination of wall mount and TV.

2.  Disconnect any cables connected to your TV.

3.  Place the TV face-down on a clean, flat, stable surface. Be sure 

the surface is clear of debris that can scratch or damage the 

TV.

4.  Remove the stand by loosening and removing the screws.

5.  Remove the screws from the wall mount holes on the back of 

the TV. Save these screws with the stand.

Note: If you remove the TV from the wall mount and set it up on 

the stand, you must reinstall these screws.

6.  Attach your TV and wall mount to the wall, carefully following 

the instructions that came with your mount. 

 

Use only with a UL-listed wall mount bracket rated for the 

weight/load of this TV.