SCOTT LCT37SHA ユーザーズマニュアル

Operating Instructions

a Use the power cord connect to an earthed 120V, 60Hz AC outlet.

b Signal input and other terminals:

1. ANT1 & ANT2: 75Ω Coaxial connector for Antenna/Cable Network.

Note: ANT 1 is for ATSC(DTV), and ANT 2 is for NTSC(ATV). (Refer to page 19.)

2. OPTICAL OUTPUT: Connect the optical output to the optical input connector

of the Amplifier. (Only for DTV)

3. RS-232: The D-SUB 9 Pins terminal is used as a control port for serial

communication between PC and Panel. (Only for after-sales service & DTV)

4. Audio Output: Connect audio amplifier or other TV set that with audio input.

5. HDMI INPUT: For high quality picture display purposes. Connects to HDMI or

DVI (with DVI to HDMI Adapter-not provided) digital output connector of the

DVD or HDTV Set-top box.

6. D-Sub (VGA) INPUT: For PC display purposes. Connects to the Mini D-Sub

15 Pins analog output connector of the PC display card.

7. VGA/DVI AUDIO INPUT: Connect the audio input terminal to the audio output

terminal of DVD or HDTV Set-top box with VGA/DVI output terminal.

8. YPbPr (COMP1) INPUT: Connect the Component video input terminal to the

Component output terminal of the video output device.

YPbPr (COMP1) Audio INPUT: Connect the audio input terminal to the audio

output terminal of the video output device.

9. YPbPr (COMP2) INPUT: Connect the Component video input terminal to the

Component output terminal of the video output device.

YPbPr (COMP2) Audio INPUT: Connect the audio input terminal to the audio

output terminal of the video output device.

4.3 Rear View

Sketch map

2 3 4