SCOTT LCT37SHA ユーザーズマニュアル
Operating Instructions
■ Using the “Channel Skip”
1 Press Menu button, and then press
or
button until the “TV”
menu appears.
2 Press or button to highlight
the item.
3 Press or button to “On” or
“Off”, when select “On” the channel
is skipped.
4 Press Menu or Exit button to
return.
■ Using the “Channel Name”
1 Press Menu button, and then press
or
button until the “TV”
menu appears.
2 Press or button to highlight
the item.
3 Press Enter button to confirm, it
will display “Channel Name” list.
4 Use , , or button for
select, and move cursor to “OK”,
then press
Enter button for confirm
you selection. If you want to cancel
this operation, move cursor to
“Cancel” and press
Enter button
for close this setting.
5 Press Menu or Exit button to
return.
Note: It will be invalid if the current
source is not TV.
■ Selecting Channel
1 Press CH +/- button on the remote control to search the channels, the channel
numbers will increase or decrease by 1 for each pressing excluding the
skipped channels.
2 Press number buttons 0~9 to select the corresponding channel content. If the
channel number is bigger than 9, just press the two number buttons
successively. If the channel number is bigger than 100, just press the three
number buttons successively. The time interval should not exceed 2 seconds.