Bang & Olufsen Aug-40 ユーザーズマニュアル
28
>> Set the television to switch itself on or off
DTV Play Timer
You can program a Play Timer on a
connected Bang & Olufsen audio or
video product. If the Play Timer uses the
DVB Module in the television as source,
you must tell it which MODE it should
start in. That is should radio or television
switch on. Also you must tell it which
video product. If the Play Timer uses the
DVB Module in the television as source,
you must tell it which MODE it should
start in. That is should radio or television
switch on. Also you must tell it which
GROUP, that is which of the station or
channel groups should be used when
the Play Timer is executed.
the Play Timer is executed.
To make settings for a DTV Play Timer …
> Bring up the TV SETUP menu and highlight
OPTIONS.
> Press the centre button to bring up the
OPTIONS menu and highlight DTV PLAY
TIMER.
> Press the centre button to bring up the
DTV PLAY TIMER menu, and use the
navigation button up or down to move
between MODE and GROUP.
navigation button up or down to move
between MODE and GROUP.
> Use the navigation button left or right to
select the setting you want.
> Press the centre button to store the
setting.
> Press BACK to back up through previous
menus or press and hold BACK to exit all
menus.
menus.
Note! If the TV tuner is disabled, and the
DVB module is activated by pressing TV on
the remote control, the name of the menu is
DVB module is activated by pressing TV on
the remote control, the name of the menu is
TV PLAY TIMER.
Also remember to set the PLAY TIMER menu
to ON, if the television or its speakers are to
be activated by the Play Timer.
Auto standby
The television can be set to switch itself
to standby after some time with no
operation. The factory setting is 4 hours.
operation. The factory setting is 4 hours.
This function only applies in video mode
not in audio mode.
To activate the auto standby …
> Bring up the TV SETUP menu and highlight
OPTIONS.
> Press the centre button to bring up the
OPTIONS menu and highlight AUTO
STANDBY.
STANDBY.
> Press the centre button to bring up the
AUTO STANDBY menu.
> Use the navigation button up or down to
select the setting you want.
> Press the centre button to store the
setting.
> Press BACK to back up through previous
menus or press and hold BACK to exit all
menus.
menus.
When you have activated the function, a
message appears on your television screen if
the television has not been operated during
the time set in the menu. The television then
switches to standby, if you do not operate it.
the time set in the menu. The television then
switches to standby, if you do not operate it.
DTV PLAY TIMER menu
AUTO STANDBY menu
DTV PLAY TIMER
MODE
TV
GROUP
SPORT
AUTO STANDBY
AFTER 1 HOUR
AFTER 2 HOURS
AFTER 4 HOURS
OFF
AFTER 2 HOURS
AFTER 4 HOURS
OFF