AT&T MLS-18D ユーザーズマニュアル

Ringing Patterns

You can tell the type of call coming in by the way the phone rings:

Ring...Ring...Ring...Ring..Ring...Ring...

Outside Call

Ring-BEEP...Rlng-BEEP...Ring-BEEP...

Inside Call

Ring-BEEP-BEEP...Ring-BEEP-BEEP...

Transferred Call

Lights

Red (top) Iight shows what is happening on the line at ANOTHER extension

Green (bottom) Iight shows what is happening on the line at YOUR extension.

Steady on: Line is busy.

Off (off continuously): Line is idle, available for use.

Flash [long on, long off): Call is ringing on the Iine.

Alternating Red/Green Flash: (red on, green on, red on, green on)

Appears at all extensions in a conference or joined call.

Wink (long on, short off): Call is on hold (anyone with line can pick up).

Flutter (short on, short offf): Conference call is on hold.

Help!

If you have problems with your phone, contact your System Manager.

If the problem is not solved, in the continental U.S. please call our toll-free
Heipline, available 24 hours a day, at 1 800 628-2888. Outside the continental
U.S., contact your local AT&T Authorized Dealer.

Auto Dial Numbers

To store an extension number or outside number for one-touch dialing:

1. Press [ Feature ] [ 0 ] [ 0 ] .

2. Press a programmable Auto Dial button (see p. 3).
3. Press left [ Intercom ] and dial the extension number, or dial the telephone

number up to 20 digits, including special functions, see box below. (To set up
an Auto Dial button for group paging, press [ Intercom ] [ * ] [ 7 ] .)
To store additional Auto Dial numbers, repeat Steps 2 and 3.

4. Press [ Feature ] [ 0 ] [ 0 ] when you are done.

To insert a...

Press...

Pause (1.5 seconds)
Recall
S t o p
Touch-Tone Enable

[ Hold ]
[ Spkr ]
[ Mic ]
[ Transfer

]