JVC SR-DVM700E ユーザーズマニュアル
Filename [DVM700EU_05Name.fm]
Masterpage:Left0
16
EN
Page 16
Wednesday, 25 January 2006 10:28
INSTALLING YOUR NEW UNIT
It’s essential that your unit be properly connected.
Connecting to a TV Monitor
Connect the unit to a TV depending on the TV and cables you use.
8 AV Connection
To connect to a TV with AV connector
To connect to a TV with AV connector
^
A Connect the [AUDIO/VIDEO OUTPUT] connectors on the rear
panel of the unit and the TV’s audio/video input connectors with
the supplied Audio/Video cable.
the supplied Audio/Video cable.
To connect to a TV with BNC connector
^
A Connect an optional audio cable between the [AUDIO
OUTPUT] connectors on the rear panel of the unit and the TV’s
audio input connectors.
audio input connectors.
B Connect an optional BNC video cable between the unit’s BNC
[VIDEO OUTPUT] connector and the TV’s BNC VIDEO input
connector.
connector.
8 S-Video Connection
To connect to TV’s S-VIDEO input and AUDIO input
connectors
To connect to TV’s S-VIDEO input and AUDIO input
connectors
^
A Connect the unit’s [S-VIDEO OUTPUT] connector to the TV’s
S-VIDEO input connector.
B Connect the unit’s [AUDIO OUTPUT] connectors to the TV’s
AUDIO input connectors.
●
If your TV is not stereo-capable, use the unit’s [AUDIO
OUTPUT] connectors to connect to an audio amplifier for Hi-Fi
stereo sound reproduction.
OUTPUT] connectors to connect to an audio amplifier for Hi-Fi
stereo sound reproduction.
8 Component Video Connection
To connect to TV’s component video input connectors
To connect to TV’s component video input connectors
^
A Connect the unit’s [COMPONENT VIDEO OUT (Y/P
B
/P
R
)]
connectors to the TV’s component video input connectors.
B Connect the unit’s [AUDIO OUTPUT] connectors to the TV’s
AUDIO input connectors.
●
You can obtain high-quality component video pictures.
●
The [COMPONENT VIDEO OUT (Y/P
B
/P
R
)] connectors do not
output DV signals.
●
If your TV is not stereo-capable, use the unit’s [AUDIO
OUTPUT] connectors to connect to an audio amplifier for Hi-Fi
stereo sound reproduction.
OUTPUT] connectors to connect to an audio amplifier for Hi-Fi
stereo sound reproduction.
●
By using the component video connection, you can view the
images in the progressive mode. For switching to the
progressive mode, refer to
images in the progressive mode. For switching to the
progressive mode, refer to
AScan Mode Set (HDD & DVD Deck
Only)
B (A pg. 63).
Connecting to a DV Device
A Connect the unit’s [S-VIDEO INPUT] or [VIDEO INPUT]
connectors on the front panel to the camcorder’s s-video or
video output connectors.
video output connectors.
B Connect the unit’s [AUDIO INPUT] connectors on the front
panel to the camcorder’s audio output connectors.
Connecting to Another Recorder
A Connect the unit’s [S-VIDEO INPUT] or [VIDEO INPUT]
connectors to another recorder’s s-video or video output
connectors.
connectors.
B Connect the unit’s [AUDIO INPUT] connectors to another
recorder’s audio output connectors.
Plug the end of the mains power cord into a mains outlet.
●
APLEASEB and AWAITB blink alternately on the front display
panel when the AC plug of the mains power cord is
connected into a mains outlet. After a short while,
panel when the AC plug of the mains power cord is
connected into a mains outlet. After a short while,
A32**B
blinks on the front display panel and starts to count down.
It takes approximately 50 seconds for the unit to be turned
on. This is not a malfunction.
It takes approximately 50 seconds for the unit to be turned
on. This is not a malfunction.
Basic Connections
ATTENTION:
Connect the AC plug only after all connections to the TV has
been completed.
Connect the AC plug only after all connections to the TV has
been completed.
●
Make sure the package contains all of the accessories listed in
ASPECIFICATIONSB (A pg. 74).
ASPECIFICATIONSB (A pg. 74).
●
Place the unit on a stable, horizontal surface.
TV
Audio/Video
cable
(not supplied)
S-video cable
(not supplied)
(not supplied)
To [S-VIDEO
INPUT]
INPUT]
To
[S-VIDEO
OUTPUT]
[S-VIDEO
OUTPUT]
S-video cable
(not supplied)
(not supplied)
To
[AUDIO/
VIDEO
OUTPUT]
Audio/Video
cable
(supplied)
Component video
cable
(not supplied)
To
[VIDEO
OUTPUT]
Back of unit
To
[COMPONENT
VIDEO OUT
(Y/PB/PR)]
To [AUDIO/VIDEO INPUT]
Mains power cord
Mains outlet
Audio/Video
cable
(not supplied)
S-video cable
(not supplied)
(not supplied)
Camcorder
Another Recorder
BNC video
cable
(not supplied)
To [S-VIDEO
INPUT]
THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO
OPERATION CAN BE PERFORMED.
OPERATION CAN BE PERFORMED.
DVM700EU_00.book Page 16 Wednesday, January 25, 2006 10:28 AM