JVC D-VHS ユーザーズマニュアル
Masterpage:Right-FullCol
EN
13
Filename [HM-DH5U_Eng.fm]
Basic Connection
A
Check contents
Make sure the package contains all of the
accessories listed in ‘SPECIFICATIONS’ (A page
89).
accessories listed in ‘SPECIFICATIONS’ (A page
89).
B
Situate VCR
Place the VCR on a stable, horizontal surface.
C
Connect VCR to TV
The following connections are required.
A Disconnect the TV antenna from the TV.
B Connect the TV antenna cable to the VCR’s
A Disconnect the TV antenna from the TV.
B Connect the TV antenna cable to the VCR’s
[ANTENNA IN] terminal.
C Connect the supplied RF cable between the
VCR’s [ANTENNA OUT] terminal and the
TV’s antenna input terminal.
TV’s antenna input terminal.
D Connect a HDMI cable between the VCR’s
[HDMI OUT] connector and the TV’s HDMI
input connector.
If your TV has only DVI input, use a HDMI to
DVI conversion cable to connect to the VCR’s
[HDMI OUT] connector. Also, connect an
audio cable between the VCR’s [AUDIO
OUTPUT] connectors and the TV’s audio
input connectors. If your TV is connected to
an AV Amplifier, you can make use of the
VCR’s [OPTICAL] connector to connect to the
amplifier (A page 64).
input connector.
If your TV has only DVI input, use a HDMI to
DVI conversion cable to connect to the VCR’s
[HDMI OUT] connector. Also, connect an
audio cable between the VCR’s [AUDIO
OUTPUT] connectors and the TV’s audio
input connectors. If your TV is connected to
an AV Amplifier, you can make use of the
VCR’s [OPTICAL] connector to connect to the
amplifier (A page 64).
E Connect an i.LINK cable between the VCR’s
[i.LINK IN/OUT] connector and the TV’s
i.LINK input/output connector.
i.LINK input/output connector.
* If your TV does not have a HDMI or DVI
connector, you can make a ‘Component Video
Connection’ or ‘VIDEO/S-VIDEO Connection’
as stated below:
Connection’ or ‘VIDEO/S-VIDEO Connection’
as stated below:
Component Video Connection
a– Connect a component video cable between
a– Connect a component video cable between
the VCR’s [COMPONENT VIDEO OUT]
connectors and the TV’s component video
input connectors.
connectors and the TV’s component video
input connectors.
b– Connect an audio cable between the VCR’s
[AUDIO OUTPUT] connectors and the TV’s
audio input connectors.
audio input connectors.
VIDEO/S-VIDEO Connection
a– Connect an S-Video cable between the VCR’s
a– Connect an S-Video cable between the VCR’s
[S-VIDEO OUTPUT] connector and the TV’s
S-Video input connector.
If your TV does not have a S-Video input
connector, use a video cable to connect
between the VCR’s [VIDEO OUTPUT]
connector and the TV’s video input
connector.
S-Video input connector.
If your TV does not have a S-Video input
connector, use a video cable to connect
between the VCR’s [VIDEO OUTPUT]
connector and the TV’s video input
connector.
b– Connect an audio cable between the VCR’s
[AUDIO OUTPUT] connectors and the TV’s
audio input connectors.
audio input connectors.
D
Connect VCR to power source
Connect the AC power plug to the AC outlet.
•
The clock and tuner channels will automatically
be set when the antenna is connected and when
the AC power cord is first connected to an AC
power outlet (A page 16).
(If [AUTO] or channel numbers are displayed
on the front display panel before the VCR is
turned on, the clock and tuner channels are
being set automatically. Wait until the clock
time is displayed on the front display panel
before turning on the VCR.)
be set when the antenna is connected and when
the AC power cord is first connected to an AC
power outlet (A page 16).
(If [AUTO] or channel numbers are displayed
on the front display panel before the VCR is
turned on, the clock and tuner channels are
being set automatically. Wait until the clock
time is displayed on the front display panel
before turning on the VCR.)
E
Final preparation for use
Turn on the VCR.
•
ATTENTION:
When this VCR is connected to some HDMI devices, signals
that are normally output from the VCR in the 480i image
format may be outputted as 480p image format signals. In
such cases, signal cannot be output from the [S VIDEO
OUTPUT] connector or the [VIDEO OUTPUT] connectors.
If the [S VIDEO OUTPUT] connector or the [VIDEO
OUTPUT] connectors are used, press the [HDMI] button on
the front panel to turn off the [HDMI] LED and set “TV
OUTPUT 2” to “ALLto480i” (
that are normally output from the VCR in the 480i image
format may be outputted as 480p image format signals. In
such cases, signal cannot be output from the [S VIDEO
OUTPUT] connector or the [VIDEO OUTPUT] connectors.
If the [S VIDEO OUTPUT] connector or the [VIDEO
OUTPUT] connectors are used, press the [HDMI] button on
the front panel to turn off the [HDMI] LED and set “TV
OUTPUT 2” to “ALLto480i” (
HM-DH5U_Eng.fm Page 13 Friday, June 25, 2004 11:42 AM