JVC DR-MH30S ユーザーズマニュアル

Masterpage:Right+

Filename [DR-MH30US_10Subsidiary.fm]

Page 69

Thursday, 8 July 2004  15:30

8 SUPERIMPOSE — OFF / AUTO

When this function is set to “AUTO”, various operational indicators 
appear on the TV screen. Messages appear in the selected 
language. (

OFF

: To turn off superimposed indications.

: To superimpose operational indications for approximately 

five seconds just after the corresponding operation.

● Even when “SUPERIMPOSE” is set to “OFF”, you can display the 

various operational indicators by pressing ON SCREEN. To clear the 
operational indicators, press ON SCREEN again.

● When you use this unit as the source player for editing, be sure to set 

“SUPERIMPOSE” to “OFF” before starting. (

● When you select “AUTO”, during playback, the operation mode 

indicators may be disturbed depending on the type of disc being used.

8 BLUE BACK — OFF / ON

When this function is set to “ON”, the TV screen becomes all blue 
when receiving a channel not in use.
NOTE:

When you want to receive an unstable channel with poor signals, set 
this function to “OFF”.

8 DIMMER — BRIGHT / DIMMED1 / DIMMED2 / OFF

You can change the brightness of the front display panel.

: Normally select this.

DIMMED1

/

DIMMED2

: To change the brightness level. (Blue lamp 

on the front display panel becomes dimmer.)

OFF

: To dim the front display panel. (Blue lamp on the front display 

panel is turned off.)

8 POWER SAVE — OFF / ON

When this function is set to “ON”, you can reduce the power 
consumption while the unit is turned off.
NOTES:

● During Power Save mode —

— the front display panel will be turned off.

● Power Save does not work when —

— the unit is in the Timer mode.
— the unit’s power is turned off after timer-recording or Instant Timer 
Recording.
— the Automatic Satellite Program Recording mode is engaged. 
(

● It takes some time for the unit to complete initialisation after you turn 

on the unit power, with “WAKE UP” blinking on the front display panel.

8 ON SCREEN LANGUAGE

This unit offers you the choice to view on-screen messages in 3 
different languages.
For details, refer to “On-screen Language Set” (

If you connect the unit and TV with Component Video Connection 
(

墌 pg. 19), you can select the scan mode from two modes: 

Interlaced scan mode which is used in the conventional TV system, 
and Progressive scan mode which enables reproduction of higher-
quality images.

8 Interlaced scan

In the conventional video system, a picture is shown on the display 
monitor in two halves. The Interlaced scan system places lines of 
the second half of the picture in-between lines of the first half of the 
picture.

8 Progressive scan

Progressive scan displays all the horizontal lines of a picture at one 
time, as a single frame. This system can convert the interlaced 
video from DVD into progressive format for connection to a 
progressive display. It dramatically increases the vertical resolution.

Press PROGRESSIVE SCAN for 3 or more seconds.

● Video output indicator (

) lights on the front display panel if 

Progressive scan mode has been established. (

● Each press of PROGRESSIVE SCAN for 3 or more seconds 

switches the scan mode.

● Interlaced scan mode is the setting at your purchase.

● Interlaced scan mode might be suitable depending on video material.

● Scan mode cannot be set while menu screen is displayed.

● When the Progressive scan mode is engaged, no video signal is 

output from S-VIDEO OUTPUT connectors and VIDEO/AUDIO 
OUTPUT connectors.

Your TV needs to be compatible with Progressive.

● Turn on the unit.

● Turn on the TV and select the AV mode.

● Slide the TV/CABLE/DBS/DVD switch to DVD.

CABLE/DBS

DVD

TV

DR-MH30US_00.book  Page 69  Thursday, July 8, 2004  3:32 PM