Maxtor SLD240 ユーザーズマニュアル

36 

 

 

 

 

 

This option allows you to configure  the  status of the RS-232 port and the Ethernet 

communications settings. (Please refer to Section 12 for advanced RS-232 and RS-485 settings.) 

 

 

 

 

Communication ID for RS232 and  RS485 communication. After  the D VR

 

receives an RS232 or 

RS485 command, it checks if the <Dest ID> within the code is the same as the COMM ID, in 

which case the particular command can be accepted.

 

 

The RS-232 communication port can be either in an  importing or exporting mode according to 

your applications. 

ON: Enables the RS-232 communication port. When you wish the unit to be controlled by 

an external device, please select this entry for use. 

OFF: Disables the RS-232 communication port. 

Note:  RS-232 advanced protocol commands can be found in Section 12. 

 

The RS-485 communication port can be either in an importing or exporting mode according to 

your applications. 

ON: Enables the RS-485 communication port. When you wish the unit to be controlled by 

an external device, please select this entry for use. 

OFF: Disables the RS-485 communication port. 

Note:  RS-485 advanced protocol commands can be found in Section 12. 

 

 

 
 
 

: OFF 

: SET