Motorola 530 ユーザーズマニュアル
29
Chapter 4
3. Normally closed.
4. Motion + N-C.
5. Motion + N-O.
In normally open mode, if the cable between the sensor and the unit is cut
by an intruder, the unit starts recording. In normally closed mode, if the
cable between the sensor and the unit is cut by an intruder, the unit stops
recording.
4. Motion + N-C.
5. Motion + N-O.
In normally open mode, if the cable between the sensor and the unit is cut
by an intruder, the unit starts recording. In normally closed mode, if the
cable between the sensor and the unit is cut by an intruder, the unit stops
recording.
4.12 How to Operate Motion Detection Recording
Follow the steps given below to activate motion-detection recording.
1.
1.
Please go to the “SENSOR SETUP” menu as shown in the figure.
2.
Select the required motion option.
3.
After the selection, please go back to the MAIN MENU and go to
“PROGRAMMED RECORD” to activate the alarm setting.
“PROGRAMMED RECORD” to activate the alarm setting.
Note:
Setting “PROGRAMMED RECORD” is neces-
sary for starting the operation of motion detection
recording.
sary for starting the operation of motion detection
recording.
SENSOR SETUP
SENSOR RECORD TIME 15
ALARM OUT TIME 20
CHANNEL-1 TYPE:MOTION + N-C
CHANNEL-2 TYPE:MOTION + N-O
CHANNEL-3 TYPE:NORMAL
CLOSE
CHANNEL-4 TYPE:NOT
INSTALLED
ALARM OUT TIME 20
CHANNEL-1 TYPE:MOTION + N-C
CHANNEL-2 TYPE:MOTION + N-O
CHANNEL-3 TYPE:NORMAL
CLOSE
CHANNEL-4 TYPE:NOT
INSTALLED
PRESS (
¿À
), THEN ( )
PRESS( ) TO EXIT
PROGRAMMED RECORD
+ T T T S S T T T T T T T T T +
0 3 6 9 12 15 18 21 24
PRESS (
¿À
), THEN ( )
PRESS( ) TO EXIT