Motorola DCH6416 ユーザーズマニュアル

8

 

The DCH6416 receivers are separable security products that use a removable 
security mechanism known as a CableCARD

™

. The CableCARD allows the DCH 

receiver to decrypt digital video services available on the cable plant from your digital 
cable provider. If the CableCARD is not properly inserted into the DCH receiver’s 
rear panel M-Card slot, you will not be able to view cable television programs, 
previously recorded programs on the DVR, or interactive on-demand programs. 

 Under no circumstance should the CableCARD be removed from 

the DCH6416 receiver. 

In certain scenarios, the DCH receiver will generate an on-screen alert banner if an 
issue is detected with the CableCARD. These scenarios include: 
•  Removal of the CableCARD 
•  Insertion of an unsupported CableCARD 
•  Invalid security certificate provided by the CableCARD 
•  Invalid pairing between the CableCARD and the DCH receiver 

 Please contact your cable operator immediately if any of these 

scenarios occur. If the CableCARD has been removed, there is no need to 
contact your cable operator. Simply re-insert the card. 

In the event that the CableCARD is removed from the DCH receiver, all access to 
live, recorded, and on-demand television programming will be terminated. The 
DCH6416 will be unable to provide access to television programming until the 
CableCARD is re-inserted into the DCH receiver. While the CableCARD is removed 
from the DCH receiver, the following on-screen alert banner will be shown: 

 

In the event that an unsupported CableCARD is inserted into the DCH6416 receiver, 
all access to live, recorded, and on-demand television programming will be 
terminated. The DCH6416 will be unable to provide access to television 
programming until a supported CableCARD is re-inserted. When an unsupported 
CableCARD is inserted into the DCH receiver, the following on-screen alert banner 
will be shown: 

 

IMPORTANT: The DCH6416 supports the M-Card or Multi-Stream CableCARD 
device only. When operating with Thin Client and not OCAP(TM) software, the 
DCH6416 requires the Motorola M-Card.