Motorola DCH6416 ユーザーズマニュアル

 

11 

Before you move or change components on the subscriber’s entertainment system: 
•  Review the installation instructions.  
•  Determine if you are connecting to a standard (analog NTSC supporting RF 

input, Baseband Composite video or S-Video) or a High-Definition TV 
(Component video, HDMI, DVI or IEEE 1394). 

•  Determine if the subscriber has other equipment to be connected to the terminal 

(Home Theater or A/V receiver, VCR, etc.).

 

Verify that you have the necessary 

cables and other required items. 

•  If the terminal was previously used, clear its hard drive before installing it at a 

new subscriber location 

On a previously-used cable terminal, delete all recorded programs from the hard 
drive before installing it at a new subscriber location. This prevents your new 
subscriber from viewing programming they may not have purchased or may not want 
to see. 

To prevent subscribers from accidentally deleting all of their recorded programs, a 
specific set of keystrokes is required to clear the hard drive. Having a TV connected 
is optional. 

To clear the hard drive: 

1.  Start the diagnostics as described in the 

Diagnostics 

section; d 01 is displayed on 

the front-panel display. 

2.  Using a remote control, within five seconds, press 

REPLAY

, 

MY DVR

 three times, 

and 

LIVE TV

. (On some remote controls, the 

MY DVR

 key may be labeled 

LIST

.) 

3.  If you correctly enter this key sequence in five seconds or less, the hard drive is 

cleared and the front-panel displays Clr. 

4. If Clr is not displayed, re-enter the key sequence in step 2. 

5. If Clr is displayed, press any other key to reset the terminal, turn it off, and 

complete the clearing process.