Motorola DCX3510-M ユーザーズマニュアル
Installation
B
High-Definition DVR DCX3510-M • Installation Manual
18
365-095-17066-x.1
Connecting an HDTV — Single Connection for Video/Audio
This section describes steps to connection the DCX to an HDTV using connection
options that combine video and audio into a single cable.
options that combine video and audio into a single cable.
Cable In
Connect an RF coaxial cable to the cable wall outlet and the cable in connector on the
DCX set-top.
HDMI
If the TV has an HDMI input, this is for both audio and video if you are using the TV
speakers. Connect a Standard HDMI cable to the TV and to the HDMI connector on the
speakers. Connect a Standard HDMI cable to the TV and to the HDMI connector on the
DCX set-top.
IEEE-1394
If the HDTV has an IEEE-1394 connector, you can use the IEEE-1394 for both the video
and audio connection:
Connect an IEEE-1394 cable to the IEEE-1394 connector on the HDTV and DCX set-top.
and audio connection:
Connect an IEEE-1394 cable to the IEEE-1394 connector on the HDTV and DCX set-top.
Note: On-screen graphics are not displayed when you are using the IEEE-1394
connection on the rear panel of the DCX set-top.
If there is an audio/video receiver and you are not using the TV’s speakers, go to
Because HDMI and IEEE-1394 provide both video and audio output, no additional audio
connections to the TV are required if you use either of these connections.
connections to the TV are required if you use either of these connections.