Motorola DCX3510-M ユーザーズマニュアル
Installation
B
High-Definition DVR DCX3510-M • Installation Manual
31
365-095-17066-x.1
Operational Check for the Remote Control
The operational check tests communication with the remote control:
Table 3: Operational check procedures
Feature
Testing Procedure
Power on
Press power on the remote control to turn on the DCX3510-M.
Tune to the output channel (3 or 4), if using the RF output.
Tune to the output channel (3 or 4), if using the RF output.
Channel
selection
Scan through the channels using the channel + or - keys.
Tune to several channels by entering the channel number using the numeric keys.
Tune to several channels by entering the channel number using the numeric keys.
Volume
control
Press volume + or - on the remote control to increase the volume to its upper limit,
lowest level, and to a comfortable level.
Press mute to turn the sound off. Press mute again to restore the sound.
lowest level, and to a comfortable level.
Press mute to turn the sound off. Press mute again to restore the sound.
If the DCX3510-M does not operate properly, refer to the Troubleshooting section.