Manualsbrain.com
  1. マニュアル
  2. ブランド
  3. Mitsubishi Electronics
  4. DX-TL950E
  5. ユーザーズマニュアル

Mitsubishi Electronics DX-TL950E ユーザーズマニュアル

ダウンロード
ページ / 90
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Specifications
90
Specifications
Rated Power Supply:
AC 100-240V  50/60Hz
Rated Input:
0.60 - 0.30A (100-240V)
Color System:
PAL type color system.
Operating Temperature:
41
°
F-104
°
F (5
°
C to 40
°
C).
Relative Humidity:
Max.80(%)
Altitude:
Max.2000(m)
Dimensions:
300(Width) x 350(Depth) x 88(Height)(mm).
Weight:
5.0kg
Recording System
Digital recording method using WAVELET compression.
  Sampling
13.5MHz
  Data Compression
WAVELET
  Compression Unit
Field
Resolution
684 x 288
Recording Device
250GB HD
D or higher
Video Input:
9 Input BNC-Connector:
1.0 V(p-p), 75 ohms.
Monitor Output:
S-Connector:
Y-Signal: 1.0 V(p-p), 75 ohms.
C-Signal: 0.3 V(p-p), 75 ohms.
2 Output BNC-Connector:
1.0 V(p-p), 75 ohms.
                                                                         RCA-Pinplug:                          1.0 V(p-p), 75 ohms.
Throughout Output:
9 Output BNC-Connector:
1.0 V(p-p), 75 ohms.
Audio Input:
RCA-Pinplug:                          308 mV(rms), 50 kohms.
Audio Output:
2 Output RCA-Pinplug:           308 mV(rms), 1 kohms.
Microphone Input:
Ø
3.5mm minijack:
0.346 mV(rms), 600 ohms.
Timer Program:
8 programs-Daily start and stop time for one week x 3set.
Memory Backup:
Lasts for more than 1 month.
CONNECTORS
ALARM IN(1-9) Input:
Terminal for starting alarm recording.
CLOCK ADJ Input:
Terminal for adjusting clock.
REC Input:
Terminal for start recording.
EMERGENCY Input:
Terminal for start emergency recording.
GND:
Terminal for ground.
MODE OUT(1-5) Output:
Terminal for indication of recording selected mode.
DC 12V OUT Output:
Terminal for DC 12V OUT. Max. Drive current 350mA DC. ( 350mA : 11.5 V typ 
±
 1.5 V )
CALL OUT/CALL OUT GND:
Terminal for external warning device.
Rating:
MODE OUT(1-5)
Active:
“Low” Level.
Max. Drive current 7mA DC.
Non active:
Open.
Max. Voltage +24V DC.
ALARM IN / CLOCK ADJ /
Active:
When terminals are short-circuited
REC/EMERGENCY
or “Low” Level voltage is applied.
Non active:
Open.
CALL OUT /
Active:
ON.
Max. Drive current 7mA DC.
CALL OUT GND
Non active:
Open.
Max. Voltage +24V DC.
RS-232C
RS-232C (D-SUB 9pin) connector for connection with personal computer.
ETHERNET                                                      Connector form:         RJ-45
                                                                         Physical interface:      10BASE-T
Accessories
AC power cord (for U.K / for the Continent)
2
COMPACT FLASH slot cover (mounted on unit)
1
Compact Flash Card recording format
Original format  (FSM2)
Weight and dimensions shown are approximate.
Design and specifications are subject to change without notice.
SLD Security & Communications
The Old Forge, Ockham Lane, Ockham, Surrey GU23 6PH England
Phone +44.1483225633 · Fax +44.1483225634
sales@sld.co.uk · www.sld.co.uk