Mitsubishi Electronics DX-TL930E ユーザーズマニュアル
11
ENGLISH
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Basic Operations
4) The <COPY SELECTION> menu (press the
COPY button to display the menu).
COPY button to display the menu).
<COPY SELECTION>
@COPY DIRECTION HDD}COPY
OVERWRITE OFF
TRANSFER PERIOD A/B
FROM:09-06-99 18:43:52
TO:10-06-99 18:43:52
EXECUTE OFF
@COPY DIRECTION HDD}COPY
OVERWRITE OFF
TRANSFER PERIOD A/B
FROM:09-06-99 18:43:52
TO:10-06-99 18:43:52
EXECUTE OFF
Refer to “Menu displays” on pages 21 to 23 for
the construction of the menus.
♦
Setting the present time
The correct time is necessary for all your recordings. Please
follow steps below to set the present time.
follow steps below to set the present time.
Example: Setting the present time to 6:30 p.m., 15 March,
2000.
2000.
1. Press the SET UP button.
• The <MENU SETTING > menu will appear.
<MENU SETTING>
@TIME DATE DISPLAY
@TIME DATE DISPLAY
MPX FUNCTIONS
TIMER PROGRAM
2. Turn the JOG dial to select the INITIAL SET UP, and turn
the SHUTTLE ring to the right.
the SHUTTLE ring to the right.
• The <INITIAL SET UP> menu will appear.
<INITIAL SET UP>
@TIME DATE ADJUST
ARCHIVE OVERWRITE
HDD FULL
HDD PB REPEAT
AUTO EJECT
@TIME DATE ADJUST
ARCHIVE OVERWRITE
HDD FULL
HDD PB REPEAT
AUTO EJECT
OFF
STOP
STOP
STOP
ON
3. Confirm that the cursor is next to the TIME DATE ADJUST,
and turn the SHUTTLE ring to the right.
and turn the SHUTTLE ring to the right.
• The <TIME DATE ADJUST> menu will appear.
4. Turn the JOG dial to select the DATE, and turn the SHUTTLE
ring to the right.
ring to the right.
• The sub-item of the DATE will start flashing.
<TIME DATE ADJUST>
DAYLIGHT SAVING OUT
DATE 01
MONTH 01
YEAR 1999
YEAR 1999
5. Turn the JOG dial to set the date number to 01, and turn the
SHUTTLE ring to the right.
SHUTTLE ring to the right.
• The sub-item of the MONTH will start flashing.
<TIME DATE ADJUST>
DAYLIGHT SAVING OUT
DATE 01
MONTH 01
YEAR 2000
6. Set the year, hour, 10 minute digit and minute digit in a
similar fashion.
similar fashion.
• Seconds cannot be set.
• The date number will flash again when you turn the SHUTTLE
ring to the right after setting the minute.
• The date number will flash again when you turn the SHUTTLE
ring to the right after setting the minute.
<TIME DATE ADJUST>
DAYLIGHT SAVING OUT
DATE 15
MONTH 03
YEAR 2000
TIME 18:30:00
DAYLIGHT SAVING OUT
DATE 15
MONTH 03
YEAR 2000
TIME 18:30:00
T u r n t h e
SHUTTLE RING
< < t o
EXECUTE.
7. Turn the SHUTTLE ring to the left to enter the setting.
• The display will return to the <INITIAL SET UP> menu.
♦
The daylight saving
Daylight saving time setting is available. The clock is put
forward one hour by setting the menu. The default setting
for this function is “OUT” . On the <TIME DATE ADJUST >
menu, move the cursor next to DAYLIGHT SAVING and
turn the SHUTTLE ring to the right. Turn the JOG dial to
flash “IN” (the daylight saving function is activating) and
turn the SHUTTLE ring to the right to enter the selection.
forward one hour by setting the menu. The default setting
for this function is “OUT” . On the <TIME DATE ADJUST >
menu, move the cursor next to DAYLIGHT SAVING and
turn the SHUTTLE ring to the right. Turn the JOG dial to
flash “IN” (the daylight saving function is activating) and
turn the SHUTTLE ring to the right to enter the selection.
♦
Present time display
The following display will appear when this unit is turned
on. (When the DISPLAY MODE is set to “3”.)
on. (When the DISPLAY MODE is set to “3”.)
01-01-2000 SAT A0001
00:00:00 25F 50
%
C1
Year
Month
Date
Day of
the week Alarm recording number
Minute
Second
Time
Recording interval
Camera number
Recorded capacity of the Hard Disk
Non-operation camera mark
Refer to “Setting Display Mode” on page 24 for
detailed settings of the display.
Alarm recording number will be displayed during
alarm recording.
If a picture of the camera which is not set to be
operated is displayed on the screen, Non-operation
Camera mark will be shown on the present time dis-
play.
Camera mark will be shown on the present time dis-
play.
The amount of space used in the HDD is dis-
played during recording. When recording is stopped,
this figure will not be displayed. (It will stay displayed
during PAUSE.) When recording is started again,
this figure will appear again after a few moments.
this figure will not be displayed. (It will stay displayed
during PAUSE.) When recording is started again,
this figure will appear again after a few moments.
INFORMATION
This unit has a four-column year
display. It can display dates from January 1, 1999 to
December 31, 2029. It also has a built-in function to
automatically calculate leap years. After December
31, 2029, the date indicator will return to 1999.
December 31, 2029. It also has a built-in function to
automatically calculate leap years. After December
31, 2029, the date indicator will return to 1999.
INFORMATION
The on-screen clock can be reset
to the nearest hour, by applying a signal to the
CLOCK ADJ terminal. For example, if the current
time is 11:29:59, it will be reset to 11:00:00, and if
the current time is 11:30:00, it will be reset to
12:00:00.
CLOCK ADJ terminal. For example, if the current
time is 11:29:59, it will be reset to 11:00:00, and if
the current time is 11:30:00, it will be reset to
12:00:00.