Mitsubishi Electronics DX-TL930E ユーザーズマニュアル
35
ENGLISH
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations
♦
Shot recording field
The following explains the setting for ONESHOT•FIELD
when REC INTERVAL is set to “SHOT”(refer to page 13).
When ONESHOT•FIELD is set to “1”, the unit performs a
shot recording of all the cameras set in the CAMERA SET-
TING parameter on the MPX FUNCTIONS screen.
when REC INTERVAL is set to “SHOT”(refer to page 13).
When ONESHOT•FIELD is set to “1”, the unit performs a
shot recording of all the cameras set in the CAMERA SET-
TING parameter on the MPX FUNCTIONS screen.
Example: ONESHOT•FIELD is set to “10”. (The default set-
ting is “1”.)
ting is “1”.)
This example covers instances where 9 cameras have been
set in the CAMERA SETTING parameter. In this case, 90
shots (9 cameras x 10 shots) are input.
set in the CAMERA SETTING parameter. In this case, 90
shots (9 cameras x 10 shots) are input.
1. Show the <MENU SETTING> menu on the screen and turn
the JOG dial until the cursor is next to RECORDING SET UP
and turn the SHUTTLE ring to the right.
the JOG dial until the cursor is next to RECORDING SET UP
and turn the SHUTTLE ring to the right.
• The <RECORDING SET UP> menu will appear.
<RECORDING SET UP>
@REC INTERVAL
@REC INTERVAL
REC P.GRADE
AUDIO RECORDING
<ESTD TIME>
<ESTD TIME>
25F
HIGH
OFF
9H11M
2. Turn the JOG dial until the cursor is next to ONESHOT•FIELD
and turn the SHUTTLE ring to the right.
and turn the SHUTTLE ring to the right.
• The sub-item will start flashing.
PRE A-REC
@ONESHOT•FIELD
ONESHOT•INTERVAL
OFF
1
SHOT
3. Turn the JOG dial until “10” flashes and turn the SHUTTLE
ring to the right.
ring to the right.
• The sub-item stops flashing.
PRE A-REC
@ONESHOT•FIELD
ONESHOT•INTERVAL
OFF
10
SHOT
By turning the JOG dial , the sub
-item of ONESHOT•FIELD shown on the screen
switches as shown below:
switches as shown below:
1 2 3 4 5
30 20 10
4. Turn the SHUTTLE ring to the left or press the SET UP
button.
button.
5. Press the REC button or ground the REC terminal on the
rear of this unit.
rear of this unit.
• The shot recording will start.
♦
Shot recording interval
When REC INTERVAL (refer to page 13) is set to “SHOT”,
the shot recording interval should be set as follows.
the shot recording interval should be set as follows.
Example: Setting ONESHOT•INTERVAL to “15S” (the de-
fault is “SHOT”).
fault is “SHOT”).
1. Repeat STEP 1 as stated above.
• The <RECORDING SET UP> menu appears.
<RECORDING SET UP>
@REC INTERVAL
@REC INTERVAL
REC P.GRADE
AUDIO RECORDING
<ESTD TIME>
<ESTD TIME>
25F
HIGH
OFF
9H11M
2. Turn the JOG dial until the cursor is next to ONESHOT-
•INTERVAL and turn the SHUTTLE ring to the right.
•INTERVAL and turn the SHUTTLE ring to the right.
• The sub-item flashes.
PRE A-REC
ONESHOT•FIELD
ONESHOT•FIELD
@ONESHOT•INTERVAL
OFF
1
SHOT
3. Turn the JOG dial until “15S” flashes and turn the SHUTTLE
ring to the right.
ring to the right.
• The sub-item stops flashing.
PRE A-REC
ONESHOT•FIELD
ONESHOT•FIELD
@ONESHOT•INTERVAL
OFF
1
15S
By turning the JOG dial, the sub-
item of ONESHOT•INTERVAL will be changed as
follows:
follows:
SHOT 15S 30S 45S
5M 3M 2M 1M
4. Turn the SHUTTLE ring to the left or press the SET UP
button.
button.
5. Press the REC button or ground the REC terminal on the
rear of this unit.
rear of this unit.
• The shot recording will start.