RGB Spectrum DGy 201x ユーザーズマニュアル

. . . . .

Time

Sets the addresses of Network Time Servers used to 
synchronize the internal DGy clock.

Output

A query command which returns information on the current 
output timing.

Output

This command selects the active format, analog RGB or DVI.

Output

Sets the output mode to FreeRun or PlayBack.

Output

Sets the timing for the current output. 

Output

Sets the output raster to the timing selected from the Timing 
List. 

Output

Assigns a name to the current output timing. 

Output

Saves the timing data of the current output raster into the Timing 
List.

Record/Play

This command pauses the Play or Record mode. 

Record/Play

Switches the DGy to Playback mode and plays a previously 
made recording.

Record/Play

Plays the current clip or list of clips to the end and automatically 
replays the list until stopped.

Record/Play

Set the playback speed. Applies to Forward and Reverse play 
modes.

Record/Play

Moves DGy from the current clip (in Play or Pause) to the 
beginning of the previous clip.

Record/Play

Sends the recorder to the previous event mark from the current 
position and cues there.

Clip/Disk

Change the status of an unprotected clip to protected.

Clip/Disk

Gives the absolute path of the current directory.

Time

Sets the internal DGy real time clock. 

Time

Provides a means to synchronize a DGy to an external time 
reference or other DGy units.

Time

Sets the update rate for synchronizing the DGy internal clock to 
an external time reference.

Clip/Disk

Places the DGy at the selected recording real-time within the 
selected clip.

Record/Play

This command switches the DGy to Recording mode.

Record/Play

Sets the degree of compression i.e. quality level (Stated in bits/
pixel).

Record/Play

Sets the rate at which input frames are compressed and stored 
to disk. 

Record/Play

Enables or disables the disk overwrite feature.

Clip/Disk

Renames clipname1 to clipname2.