Pelco DX3016-060 ユーザーズマニュアル

58

Pelco Manual C681M-D (2/02)

 You cannot operate the CAMERA buttons when a menu is displayed on the

screen. The buttons do not work when the recorder is accessing a peripheral
recording device or the ARCHIVE, COPY, or PLAY button is flashing.

Press the CAMERA buttons (1-9) buttons to view images from cameras connected to CAM-
ERA IN terminals at the rear of the recorder. If there is no video from a camera, or no cam-
era is connected, the screen is blue. If the camera is not programmed for recording, the
non-operational camera icon appears on the screen (display modes 1-3). Cameras are pro-
grammed in the Define Group Setting menu (refer to 

Recording

 in the 

Programming

  section).

You can still view the picture from the camera even it is not programmed to be recorded.

You cannot operate the SPLIT/SEQUENCE button when a menu is displayed

on the screen. The button does not work when the recorder is accessing a peripheral
recording device or the ARCHIVE, COPY, or PLAY button is flashing.

By pressing the SPLIT/SEQUENCE button, you can switch the display mode as follows:

Nine cameras

Sixteen cameras

Four cameras (group A)

Nine cameras (group A)

Four cameras (group B)

Nine cameras (group B)

Four cameras (group C)

Four cameras (group A)

Single-camera sequencing*

Four cameras (group B)

Four-camera group sequencing*

Four cameras (group C)
Four cameras (group D)
Single-camera sequencing*
Four-camera group sequencing*
Nine-camera group sequencing*

* The SPLIT/SEQUENCE button lights.

The refresh cycle of camera images becomes longer as the number of cameras increases.
Smoother images can be viewed when cameras that are not needed are removed from the
cameras designated in the Define Group Setting menus (refer to 

Alarms

 and 

Recording

 in

the 

Programming

 section).

Images are displayed in real time during single-camera display.

Pressing the SPLIT/SEQUENCE button during playback switches the split display options
as follows:

Nine cameras

Sixteen cameras

Four cameras (group A)

Nine cameras (group A)

Four cameras (group B)

Nine cameras (group B)

Four cameras (group C)

Four cameras (group A)
Four cameras (group B)
Four cameras (group C)
Four cameras (group D)

You can view any picture in actual screen size by pressing the camera number button.
You can go back to the previous split display by pressing the SPLIT/SEQUENCE button again.

If camera numbers are shown on the screen during sequencing of groups of four or nine
cameras, “-” appears instead of the camera number if the camera’s operation has been
turned off in the Define Group setting in the Normal Rec Setting menu.

If camera numbers are part of the time and date display, the display is shown only in Mode 1
when more than one camera appears on the screen.

If a camera is not programmed for recording, the screen for that camera is black. If there is
no video (camera is not turned on or is not connected), the screen for that camera is blue.