Pelco DX3108 ユーザーズマニュアル

40

C695M-B (11/03)

In addition to switching to a different channel, you can switch to video at an earlier or a later point in time. Then you can switch to a
different channel, based on the new time frame.

To access a different time frame, use one of the following methods to select the desired date and time:

•

DX3100 Front Panel:

1.

Press the 

 and  buttons to select a field to change: month, day, year, hour, minutes.

2.

Press the 

 and  buttons to increase or decrease the field value.

3.

Press the ENTER button.

4.

Use the VCR-type controls to playback video.

•

IR Remote Controller:

1.

Press the + or - button for DAY, HOUR, and MIN to select the desired date and time.

2.

Press the ENTER button.

3.

Use the VCR-type controls to playback video.

NOTE:  There is no cursor movement when using the IR Remote Controller to select a date and time.

In Figure 26, the user switches from channel 1 to channel 2, keeping the same time frame. Then the user backs up a couple of hours.
When the user switches to channel 8, the DX3100 maintains the new time frame.

NOTE:  If you select a date and time, but do not press the ENTER button, the DX3100 will ignore your date and time parameters.

Figure 26.  Switching Channels and Time Frames

CH1

CH2

CH3

CH7

CH8