Planet Technology DVR-470 ユーザーズマニュアル

                                                                                                                                                                                           

Page 8 

 

Warning：Before you install the DVR, please make sure the power of DVR is off. 

When you get the product, check that all the items are included in your product package. 
There is a list in the package. If any of the items is missing, please contact your dealer. 

Installation notice 
The DVR has not HDD when leaving factory. Based on the record schedule, you can 
calculate the total capacity you need (refer to Appendix A). Please ask the specialist to 
disassembly the DVR and install HDD. 

Installation instrument 
One cross screw driver 

HDD installation 
1.  Open the DVR box. 
2.  If you want to install 2 HDD for one IDE interface, please set master and slaver HDD. If 

you want to install 4 HDD, please remove CD-R/W mount bracket. 

3.  Place the HDD on the soleplate and fix it with screw. 
4.  Connect the ATA data cable correctly. The cable has three connectors for DVR main 

board, master HDD and slaver HDD. 

5.  Plug the HDD power connector. 
6.  Cover and fix the DVR box. 

 

Note：After you install the HDD, you must format them. Please refer to section 6.4.