AVE MV DR8X ユーザーズマニュアル

User’s Manual 

 

   

 

24 

 

This function is used to set the Day / Night / Weekend PPS (Picture per 
Second) and Quality for each channel. The Preset Configuration must be set 
to <OFF> for accessing these schedules. The menu is displayed as below 
(Record Mode: 720×240@120PPS in NTSC / 720×288@100PPS in PAL).   
 

Per Camera Config 

Cameral Select 
 
Normal PPS 
Normal Size 
Event Max PPS 
Event Size 
Event Active 

7.5

Mid

30

Best

Both

7.5

Mid

30

Best

Both

CH1  

7.5  

Mid  
 30 

Best 

Both 

 
•  Firstly, select a Camera for setting its record configuration. The image and 

recording settings from the selected camera will be displayed on the 
screen. 

•  Move the cursor using Direction keys and press ENTER to select an item. 
•  Change the value using UP / DOWN keys. 
•  Press ENTER to confirm the settings or ESC to abort. 
•  Press ESC to return to Record Setup menu. 
 
Please note that the total normal pps for all channels cannot exceed 60 NTSC 
(720×240@60PPS) / 50 PAL (720×288@50PPS). To increase one channel’s 
pps, you may have to reduce other’s first. Event pps is not restricted to this 
rule, since a smart event scheduler will handle the total pps with a correct 
weighting. 

 

If you want your DVR unit to start recording only under the alarm is triggered, 
follow the steps: 
•  Enter the OSD setup menu with correct password. 
•  In the OSD setup menu, select <Record Setup> menu. Move the cursor to 

the item <Preset Config>, and select <Event only>. 

 

Refer to OSD Menu Setup Guide, Section Preset Record Configuration for 
more detailed information.