Horizon Fitness E700 ユーザーズマニュアル
BEFORE
YOU
BEGIN
BEGIN
8
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
BEGIN
ELLIPTICAL
OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
BEFORE YOU
BEGIN
ASSEMBL
Y
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ELLIPTICAL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
ASSEMBLY STEP 2
MAIN FRAME
REAR STABILIZER
BOLT (A)
SPRING WASHER (B)
FLAT WASHER (C)
SPRING WASHER (B)
FLAT WASHER (C)
SCREW (B)
A) Open
HARDWARE BAG FOR STEP 2.
B) Secure
REAR STABILIZER to MAIN FRAME using 2 SCREWS (B).
NOTE: Make sure holes are aligned before inserting SCREWS.
SCREWS (B)
30 mm
Qty: 4
30 mm
Qty: 4
HARDWARE BAG FOR STEP 2 CONTENTS :
CONSOLE WIRES
TOP COVER
CONSOLE MAST
GROMMET
MAIN FRAME
BOLTS (C)
LOCK WASHERS (D)
ASSEMBLY STEP
A) Open
HARDWARE BAG FOR STEP 3.
B) Slide the
GROMMET and TOP COVER over the CONSOLE MAST.
C) Carefully pull the
CONSOLE WIRES through the CONSOLE MAST using the twist tie located inside the
CONSOLE MAST.
D) Attach
CONSOLE MAST
to
MAIN FRAME
using 7
BOLTS (C) and 7 LOCK WASHERS (D)
.
E) Slide
GROMMET and TOP CAP down to seal the MAIN FRAME.
BOLTS (C)
15 mm
Qty: 7
15 mm
Qty: 7
LOCK WASHER (D)
13.5 mm
Qty: 7
13.5 mm
Qty: 7
HARDWARE BAG FOR STEP CONTENTS :
* NOTE: Be careful not to
pinch any wires while
assembling the mast.
E500-E800_Rev.1.7.indd 8-9
4/27/07 1:43:48 PM