DirecTV ProScan DSS Receiver ユーザーズマニュアル

First Things First

Jacks and Cables

The S-Video jack provides the best picture quality for your DSS

®

system.

This jack is available on many TVs and is used in conjunction with
audio cables to connect the DSS

®

 receiver to your TV. Remember also

to connect the left and right audio cables because the
S-video jack carries only the picture signal, not the sound.

The audio/video jacks provide very good picture and stereo sound
quality, and should be used if your TV has no S-Video jack.

Theses jacks are used for most audio/video connections between
components. The DSS

®

 receiver audio/video jacks are color coded

(yellow for video, red for right audio, and white for left audio). If your
TV has only one input for audio (mono), connect it to the right (red)
audio jack on the DSS

®

 receiver.

The RF jacks provide good picture and mono sound quality, and are to
be used if audio/video connections are not available for your TV.

These jacks are required for antenna or cable-TV connections. The RF
jacks on the DSS

®

 receiver are labeled IN FROM ANT and OUT TO

TV. The coaxial cable supplied with your DSS

®

 system is used to

connect the RF jacks between the DSS

®

 receiver and your TV’s

antenna input.

The VCR controller cable plugs into a jack on the DSS

®

 receiver’s back

panel. The other end of the cable affixes to your VCR’s remote sensor.

The digital audio/video cable connects the DSS

®

 receiver to a

compatible D-VHS VCR. This connection lets you record and play
back digital programming with virtually no loss in picture and sound
quality.

S-Video Jack

Audio/Video Jacks

RF Jack

VCR Controller Jack

Digital Audio/Video Jack