3com V7111 ユーザーズマニュアル
You can now choose to either:
Click
Cancel
; the device resets utilizing the cmp, ini and all other configuration files
that were previously stored in flash memory. Note that these are NOT the files you
loaded in the previous Wizard steps.
loaded in the previous Wizard steps.
Click
Reset
; the device resets, utilizing the new cmp and ini file you loaded up to now
as well as utilizing the other configuration files.
Click
Back
; the ‘Load a cmp file’ screen is reverted to; see
.
Click
Next
; the ‘Load a CPT File’ screen opens (see
); Loading a new CPT
file or any other auxiliary file listed in the Wizard is optional.
Figure 30
Load a CPT File Screen
7
Follow the same procedure you followed when loading the ini file (see
procedure applies to the ‘Load a VP file’ (not applicable to the V7111 gateway) screen
and ‘Load a coefficient file’ screen.
and ‘Load a coefficient file’ screen.
8
), the Next button is disabled. Complete the
upgrade process by clicking Reset or Cancel.
Click
Reset
, the V7111 ‘burns’ the newly loaded files to flash memory. The ‘Burning
files to flash memory’ screen appears. Wait for the ‘burn’ to finish. When it finishes,
the ‘End Process’ screen appears displaying the burned configuration files (see
the ‘End Process’ screen appears displaying the burned configuration files (see
).
Click
Cancel
, the V7111 resets, utilizing the files previously stored in flash memory.
(Note that these are NOT the files you loaded in the previous Wizard steps).
3Com VCX V7111 Analog Gateway Installation Guide
51