Avaya 555-245-600 ユーザーズマニュアル

●

RMON/SMON port statistics provide real-time top-down analysis of network traffic.

●

IP multicast filtering (snooping) filters multicast traffic to optimize network bandwidth.

●

Classification of ports as regular or valuable is supported so that if a link fails, notification is 
generated for valuable ports only. 

●

The L2 CAM table contains 16K MAC addresses. 

Note:

An additional license is required for Layer 3 features.

●

Static, RIPv1, RIPv2, OSPF IP routing protocols are supported. 

●

Equal cost routing is used for load balancing and redundancy.

●

Router redundancy (VRRP) is supported.

●

NetBIOS rebroadcasting is available for applications such as WINS that use broadcasting 
but may need to also communicate with stations on other subnets or VLANs.

●

ICMP and ARP protocols are supported.

●

DHCP/BootP relay allows broadcast requests to be forwarded to servers.

●

Policy-based routing of packets provides enforcement of QoS and ACL rules.

●

The L3 CAM table contains 4K IP addresses.

●

Access to the management interfaces are password-protected at three levels (read-only, 
read-write access and supervisor) to prevent unauthorized configuration changes.

●

You can access to the Command Line Interface (CLI) in the following ways:

- Direct console or modem connection

- Telnet (up to five simultaneous connections) or SSHv2 (up to two simultaneous 

connections) over the IP network 

●

You can use TFTP for the download/upload of configuration files or the download of 
firmware files

●

You can use SCP (Secure Copy Protocol) for secure download/upload of configuration 
files 

●

You can use SSH encrypted login sessions as a secure way to manage the switches 
remotely.

●

A Java-based Device Manager provides an intuitive Web-based interface for access 

●

SNMPv1 is supported.