3com V7300 ユーザーズマニュアル

C

HAPTER

 2: I

NSTALLATION

To configure the primary policy:

1 Edit this file on the Primary Server:

/usr/app/app.dir/config.app

2 Find the line that begins with:

IM_policy=

3 Modify the line, if necessary, so that it reads:

IM_policy=primary

4 Restart Call Builder on the Primary Server.

This policy specifies that when one of the servers enters the active state, it 
stays in that state until it fails or someone shuts it down.

To configure the balanced policy:

1 Edit this file on the Primary Server:

/usr/app/app.dir/config.app

2 Find the line that begins with:

IM_policy=

3 Modify the line, if necessary, so that it reads:

IM_policy=balanced

4 Restart Call Builder on the Primary Server.

The Primary Server can enter the standby state in either of these two 
ways:

■

When the Primary Server starts, the Secondary Server is in the active 
state. Therefore, the Primary Server enters the standby state.

OR

■

Someone issues a command to force the Primary Server into the 
standby state.