Multi-Tech Systems MVP-2400 ユーザーズマニュアル
MultiVOIP User Guide
Call States/Reasons
553
Call Reasons Listing
(cont’d)
No
State
Description
16
No Change. Service
Prohibited
Prohibited
The reason for address resolution. The
required service is not allowed for the
endpoint.
required service is not allowed for the
endpoint.
17
Zone Prefix
Removed
Removed
The reason for address resolution after the
zone prefix was removed.
zone prefix was removed.
18
Exit Zone Prefix
Removed
Removed
The reason for address resolution after the
exit zone prefix was removed.
exit zone prefix was removed.
19
Ip Address Set
The reason for address resolution after the
IP address was found from the aliases.
IP address was found from the aliases.
20
Address Forwarded
The reason for address resolution after
finding that the call should be forwarded.
finding that the call should be forwarded.
21
Address Found
The reason for state
AddressResolutionDone.
AddressResolutionDone.
22
Need to Send LRQ
The reason for state
AddressResolutionDone.
AddressResolutionDone.
23
Failure in App. Event
Handler
Handler
The call cannot be completed because of a
failure in the application event handler. (For
example, the return value < 0.)
failure in the application event handler. (For
example, the return value < 0.)
24
Internal Failure
The call cannot be completed because of an
internal error.
internal error.
25
Service Not Allowed
The call cannot be completed because a
required service is not allowed.
required service is not allowed.
26
Exit Zone Not
Allowed
Allowed
The call cannot be completed because it was
dialed without an exit zone prefix, or the
exiting zone is not allowed for call.
dialed without an exit zone prefix, or the
exiting zone is not allowed for call.
27
No Destination in
Call
Call
The call cannot be completed because it was
dialed without a destination.
dialed without a destination.
28
Cannot Send LRQ
The call cannot be completed because an
LRQ cannot be sent.
LRQ cannot be sent.
29
Address Not Found
after LRQ
after LRQ
The call cannot be completed because an
LCF was not accepted for the LRQ.
LCF was not accepted for the LRQ.
30
Call Not Register
The reason for sending a DRJ.
31
Origin Connected
First
First
The reason for a Connect message that
arrives without first asking the application.
This happens when the origin is already
connected when the destination connects,
which is an error.
arrives without first asking the application.
This happens when the origin is already
connected when the destination connects,
which is an error.
32
DCF to Origin
A DCF was sent to the origin.
33
DCF to Dest
A DCF was sent to the destination.
34
App. Disconnected
Destination
Destination
An application initiated disconnect of the
destination (associated with the Call Cannot
Complete state or with GK Disconnect Call
state.)
destination (associated with the Call Cannot
Complete state or with GK Disconnect Call
state.)