Multi-Tech Systems MVP-2410 ユーザーズマニュアル

Cabling involves connecting the MultiVOIP to your LAN and telephone
equipment.

1. Connect the power cord supplied with your MultiVOIP to a live AC outlet

and to the power connector on the back of the MultiVOIP as shown at top
right in Figure 3-12.

Ethernet Connection

Command Port Connection

IS DN 1

ISD N2

IS DN 3

ISD N4

?

PBX

PSTN

*

* NT1 Device is needed

if PBX has  “U” interface.

2. Connect the MultiVOIP to a PC by using a DB-25 (male) to DB-9 (female)

cable. Plug the DB-25 end of the cable into the Command port of the
MultiVOIP and the other end into the PC serial port. See Figure 3-12.

3. Connect a network cable to the ETHERNET 10BASET connector on the

back of the MultiVOIP. Connect the other end of the cable to your network.