Multi-Tech Systems MVP-2410 ユーザーズマニュアル
Overview
MultiVOIP User Guide
18
MVP2400/2410 Front Panel LED Definitions
LED NAME
DESCRIPTION
Power
Indicates presence of power.
Boot
After power up, the Boot LED will be on for about 10
seconds while the MVP2400/2410 is booting.
seconds while the MVP2400/2410 is booting.
RCV
Receive. Lights when receiving data on Ethernet port.
XMT
Transmit. Lights when transmitting data on Ethernet
port.
port.
LNK
Link. When lit, VOIP “sees” the hub or network via
the Ethernet connection.
the Ethernet connection.
COL
Collision. Lit when data collisions occur.
T1
When lit, indicates presence of T1 connection.
E1
E1. Not supported.
PRI
PRI. On if T1 line is of ISDN-Primary-Rate type.
ONL
Online. This LED is on when frame synchroni-zation
has been established on the T1/E1 link.
has been established on the T1/E1 link.
IC
IC LED is on when Internal Clocking is selected in
T1/E1 configuration.
T1/E1 configuration.
LC
Indicates Loss of Carrier.
LS
Indicates Loss of Signal.
Test
For testing purposes only.