Polycom SIP 3.0.2 ユーザーズマニュアル

Administrator’s Guide SoundPoint IP / SoundStation IP 

A - 24

This attribute describes configuration items for the tone resources available in 
the phone.
This attribute includes:

up.welcomeSoundOnWarmBootE

nabled

0, 1

0

If set to 1, play welcome sound effect on warm 

as well as cold boots, otherwise only a cold 

boot will trigger the welcome sound effect.

up.localClockEnabled

0, 1

1

If set to 1, display the date and time on the idle 

display

up.backlight.onIntensity

0 (off),

1 (low), 

2 (medium), 3 

(high)

Null

This parameter controls the intensity of the 

LCD backlight when it turns on during normal 

use of the phone.
The default value is medium.

up.backlight.idleIntensity

0 (off),

1 (low), 

2 (medium), 3 

(high)

Null

This parameter controls the intensity of the 

LCD backlight when the phone is idle.
The default value is low.
Note: If idleIntensity is set higher than 
onIntensity, it will be replaced with the 
onIntensity value

.

up.idleTimeout

positive 

integer, 

seconds

Null

Timeout for the idle display or default call 

handling display. 
If set to 0, there is no timeout.
If set to Null, the default timeout of 20 seconds 

is used.
If set to value greater than 0, the timeout is for 

that number of seconds

 

(maximum 65536).

up.mwiVisible

0 - Disabled

1 - Enabled

0

If set to 0 or Null, there is no MWI for 

registration x (SIP 2.1.0 and 2.1.1 behavior).
If set to 1, msg.mwi.x.callBackMode is set to 

disabled. MWI notification will be displayed for 

registration x (Pre-SIP 2.1.0 behavior).

up.handsfreeMode

0 - Disabled

1 - Enabled

1

If set to 1 or Null, hands-free speakerphone is 

enabled.
If set to 0, hands-free speakerphone is 

disabled.