Polycom SIP 3.0.2 ユーザーズマニュアル
Configuration Files
A - 57
Keep-Alive <keepalive/>
Allowing for the configuration of TCP keep-alive on SIP TLS connections, the
phone can detect a failures quickly (in minutes) and attempt to re-register with
phone can detect a failures quickly (in minutes) and attempt to re-register with
the SIP call server (or its redundant pair).
This configuration attribute is defined as follows:
This configuration attribute is defined as follows:
Web Server <httpd/>
The phone contains a local web server for user and administrator features.
This can be disabled for applications where it is not needed or where it poses
This can be disabled for applications where it is not needed or where it poses
a security threat. The web server supports both basic and digest
authentication. The authentication user name and password are not
configurable for this release.
This configuration attribute is defined as follows:
authentication. The authentication user name and password are not
configurable for this release.
This configuration attribute is defined as follows:
Attribute
Permitted
Values
Values
Default
Interpretation
tcpIpApp.keepalive.tcp.idleTransmitInterval
10 to 7200
Null
After idle x seconds, the
keep-alive message is sent to
the call server.
If set to Null, the default value is
If set to Null, the default value is
30 seconds.
Note: If this parameter is set to a
value that is out of range, the
default value is used.
Note: If this parameter is set to a
value that is out of range, the
default value is used.
tcpIpApp.keepalive.tcp.noResponseTrasmitIn
terval
5 to 120
Null
If no response is received to
keep-alive message, another
keep-alive message is sent to
the call server after x seconds.
If set to Null, the default value to
If set to Null, the default value to
20 seconds.
Note: If this parameter is set to a
value that is out of range, the
default value is used.
Note: If this parameter is set to a
value that is out of range, the
default value is used.
tcpIpApp.keepalive.tcp.sip.tls.enable
0, 1
0
If set to 1, enable TCP keep-alive
for SIP signalling connections
that use TLS transport.
If set to 0, disable TCP
If set to 0, disable TCP
keep-alive for SIP signalling
connections that use TLS
transport.
Attribute
Permitted
Values
Values
Default
Interpretation
httpd.enabled
0, 1
1
If set to 1, the HTTP server will be enabled.