Polycom SIP 3.0.2 ユーザーズマニュアル

Administrator’s Guide SoundPoint IP / SoundStation IP 

4 - 6

Configuration changes can performed centrally at the boot server or locally:

The phone will flash a message-waiting indicator (MWI) LED when instant 
messages and voice messages are waiting.
Configuration changes can performed centrally at the boot server:

The phone can automatically apply distinctive treatment to calls containing 

specific attributes. The distinctive treatment that can be applied includes 
customizable alerting sound effects and automatic call diversion or rejection. 

Call attributes that can trigger distinctive treatment include the calling party 
name or SIP contact (number or URL format).
For related configuration changes, refer to 

 on page 

.

L16/16000 is not supported on SoundPoint IP 301 and SoundStation IP 4000 

phones.

The alternate sampled audio sound effect files must be present on the boot server 

or the Internet for downloading at boot time.

Configuration File: 
sip.cfg

Specify patterns used for sound effects and the individual tones or 

sampled audio files used within them. 
•

For more information, refer to 

 on page 

 or 

 on page 

.

Web Server 
(if enabled)

Specify sampled audio wave files to replace the built-in defaults. 
Navigate to http://<phoneIPAddress>/coreConf.htm#sa
Changes are saved to local flash and backed up to <Ethernet 
address>-phone.cfg

 on the boot server. Changes will permanently 

override global settings unless deleted through the Reset Local 

Config menu selection and the <Ethernet address>-phone.cfg is 

removed from the boot server.

Configuration file: 
phone1.cfg

Specify per-registration whether the MWI LED is enabled or disabled.
•

For more information, refer to 

on page 

Specify whether MWI notification is displayed for registration x 

(pre-SIP 2.1 behavior is enabled).
•

For more information, refer to 

 on page 

.