Polycom SIP 3.0.2 ユーザーズマニュアル

Administrator’s Guide SoundPoint IP / SoundStation IP 

4 - 14

Configuration changes can performed centrally at the boot server or locally:

The phone maintains a local clock and calendar. Time and date can be 
displayed in certain operating modes such as when the phone is idle and 
during a call. The clock and calendar must be synchronized to a remote Simple 
Network Time Protocol (SNTP) timeserver. The time and date displayed on 
the phone will flash continuously until a successful SNTP response is received 
to indicate that they are not accurate. The time and date display can use one of 
several different formats and can be turned off.
Configuration changes can performed centrally at the boot server or locally:

XML file:
<Ethernet 
address>-directory.
xml

The <sd>x</sd> element in the <Ethernet address>-directory.xml 

file links a directory entry to a speed dial resource within the phone. 

Speed dial entries are mapped automatically to unused line keys (line 

keys are not available on the SoundStation IP 4000) and are 

available for selection within the speed dial menu. (Press the 

up-arrow key from the idle display to jump to SpeedDial).
•

For more information, refer to 

 on page 

Local Phone User 

Interface

The next available Speed Dial Index is assigned to new directory 

entries. Key pad short cuts are available to facilitate assigning and 

modifying the Speed Dial Index value for entries in the directory. The 

Speed Dial Index field is used to link directory entries to speed dial 

operations.
Changes will be stored in the phone’s flash file system and backed up 

to the boot server copy of <Ethernet address>-directory.xml if this 

is configured.  When the phone boots, the boot server copy of the 

directory, if present, will overwrite the local copy.

Configuration file: 
sip.cfg

Turn time and date display on or off.
•

For more information, refer to 

 on page 

Set the time and date display formats.
•

For more information, refer to 

 on 

page 

.

Set the basic SNTP settings and daylight savings parameters.
•

For more information, refer to 

 on 

page 

.