Polycom VVX400 ユーザーズマニュアル

Polycom VVX 400 and 410 Business Media Phones User Guide 

Version 5.0.0

 

Polycom, Inc. 

19 

Your system administrator configures your phone with the necessary parameters so that the phone is 
registered and ready to set up before you receive your phone. 

If your phone is not part of a large phone deployment, your phone is registered after you set up your 
phone. Make sure that you or your system administrator registers the phone before you set up and begin 
using your phone. 

 

 

For detailed information on how to register your phone after you install it, see 

. 

 

This section explains how to update your phone’s settings using the phone’s menu commands. You can 
also update these settings remotely with the Polycom Web Configuration Utility.  

The Web Configuration Utility enables you to view and configure your phone’s software features from a 
computer using any compatible web browser. The utility provides a browser-friendly view of the settings 
you can configure on your phone. Using the utility, you can perform many of the same updates from your 
computer that you can p

erform using your phone’s menu system. 

 

 

For detailed information on accessing, navigating, and using the utility, see the 

 

 

Before you begin using the Web Configuration Utility, you need to know the IP address of your phone and 
the user password to log in to the utility. 

»  From Home view, Select Settings > Status > Platform > Phone, and use the arrow keys to 

navigate to your phone’s IP address. 

1  Launch a Web browser from a computer on the same network as your phone.  

2  In the address bar of your web browser, enter the IP address of your phone and press the Enter. 

For example, if your phone’s IP address is 123.22.3.4, enter this information in the address bar.