Polycom IP 501 SIP ユーザーズマニュアル

10

Time and Date is clearly displayed on the 
SoundPoint

®

 IP 500/501 SIP phone.  If the 

phone cannot obtain a time and date from the 
server, the display will flash.  Contact your 
system administrator if either time or date is 
incorrect.  
Users have control over the format of the 
display and can turn it off.  Select options 
which are right for you as follows:

Do Not Disturb

Time and Date

Headset Memory Mode

Press 

 to prevent the phone from 

ringing on incoming calls.  A flashing icon 
and text on the display indicates that Do 
Not Disturb is on.
Calls received while Do Not Disturb is 
enabled are logged in the Missed Call list.
To turn off Do Not Disturb, press 

 again.

(Optional) If multiple lines are in use, Do 
Not Disturb can be set on a line-by-line 
basis.  Contact your system administrator 
for futher details.  When Do Not Disturb 
is enabled for a particular line, this is 
indicated by a flashing “ X ” beside the line 
indicator on the display.  

As an option, the headset can be perma-
nently enabled.  This is especially useful 
for regular headset users.  To do this:

1.  Press 

.

2.  Select Settings followed by Basic, 

.

3.  Use the up or down arrows and 

Select soft key to enable Headset 
Memory Mode.

4.  Press 

 to return to the 

main menu.

Subsequent calls to or from this phone 
using the headset will activate a flashing 
headset icon on the display.  Pressing the 
line keys or 

Answer soft key to receive a 

call will now connect to the user’s headset 
automatically.

Repeat steps 1-3 and select 

Disable to turn 

Headset Memory Mode off.

Display Contrast

To adjust the contrast on the display to a 
comfortable level:

1.  Press 

.  Select Settings, 

 followed by Contrast.

2.  Press the 

Up or Down soft keys 

(or volume keys) to increase or 
decrease the display contrast.

3.  Press the 

Ok or Cancel soft keys to 

accept or cancel changes.

4.  Press 

 or the

 Exit soft key 

to return to the idle display.

1.  Press 

.

2.  Select Settings followed by Basic, 

3.  Select from Clock Date, Clock Time, 

or Enable/Disable.

4.  Scroll through the options via the up 

and down arrow keys.

5.  Press 

Select to confirm and 

 

to return directly to the idle display.