Polycom IP 501 SIP ユーザーズマニュアル

2

This section provides basic installation 
instructions and information for obtaining 
the best performance with the Sound-
Point

®

 IP 500/501 SIP phone.  If you re-

quire additional information or assistance 
with your new phone, please contact your 
system administrator.

The SoundPoint

®

 IP 500/501 SIP User 

Guide includes regulatory compliance 
information that your system administra-
tor should review and can also be found at 
http://www.polycom.com. 

Connecting Network and Power Source

AC Power Option

LAN

PC

HEADSET HANDSET

LAN

PC

HEADSET HANDSET

In-Line Power Option

LAN

PC

HEADSET HANDSET

Cisco™Catalyst™ In-Line 
Power Switch

IEEE 802.3af compliant 
In-Line Power switch

Connect the keyed end of the sup-
plied Network Cable to the LAN 
jack on the phone, and connect the 
shorter end to the Network (LAN) 
port.  Connect the DC plug of the 
AC wall adapter into the supplied 
LAN cable as shown.

If the phone is connected to a compatible 
Ethernet switch that can provide in-line 
power, the phone will use that power option.  
Simply plug the keyed end of the In-Line 
Power Cable (optional accessory) into the 
LAN jack on the phone and connect the 
shorter end of this cable to an available 
Power and Data port on the In-Line Power 
switch.  The AC wall adapter is not required 
when using In-Line power.

Cisco™ In-Line Power 
Cable 

(Part No.2457-11014-002)

OR
IEEE 802.3af In-Line 
Power Cable 

(Part. No 2457-11077-002)