Polycom 1725-16823-001 ユーザーズマニュアル

 Setting Up the Polycom VVX 1500 D Phone

2 - 13

You can create two configuration files for each phone and one configuration 

file for all phones in your installation or you can put all configuration 

parameters into one file. The example below shows one configuration file.
For more information on why to create another configuration file, refer to the 

“Configuration File Management on Polycom VVX 1500 D Phones” white 

paper at 

.

For more detailed information on specific parameters in configuration files, 

refer to 

.

Deploy Polycom VVX 1500 D phones by:

Create a phone configuration file.
For example, create phone_0004f2be80a6.cfg 

As of UC software 3.3.0, you only need to configure the parameters that do not 
match their “built-in” defaults. 

Certain configuration settings in Polycom UC Software 3.3.0 release are not 
backward compatible to the previous configuration files (sip.cfg and phone1.cfg). 
Review all configuration files used to configure the VVX 1500 D phones for previous 
software releases.

For more information, refer to 

 on page 

Use an XML editor to create/edit the configuration files. In this way, all configuration 
files that you create will be valid XML files.

If the configuration files are not valid, they will not load on the phone. An error 
message will be logged to the provisioning server.

Obtain the phone’s MAC address from the barcoded label on underside of phone or 
on the outside of the shipping box.