Polycom 1725-16823-001 ユーザーズマニュアル

 Setting Up the Polycom VVX 1500 D Phone

2 - 17

To download the new Polycom UC Software to the phone, you need to:

• Extract all files from the distribution zip file as you did in 

• Verify that the configuration files you created for 

 will work with the new UC Software. 

New and changed configuration parameters are described in the Release 

Notes. 
Follow the instructions in 

 

to download the new UC Software; you will not need to change the master 

configuration files unless you change the names of the per-phone or 

application configuration files.

You can provision your organization’s Polycom VVX 1500 D phones and 

update the software using a Polycom CMA system. Refer to the latest Release 

Notes for Polycom UC Software and Polycom CMA for specific compatibility 

requirements and recommendations.
You can also provision your organization’s VVX 1500 phones in a hybrid 

model, using both Polycom CMA and a provisioning server. In such a 

situation, Polycom CMA has a higher priority. When the phone reboots, it will 

check the Polycom CMA system first for new software, and then checks the 

provisioning server for configuration files and directories to upload if directed 

to do so (by setting the CMA mode to Disable, refer to 

 on page 

). 

In dynamic management mode, the Polycom CMA system can do the 

following:

• Configure VVX 1500 D phones using an automatic provisioning service

• Register VVX 1500 D phones with a standard-based presence service, so 

that presence states are shared with Polycom CMA contacts

• Provide VVX 1500 D phones with automatic software updates

Polycom CMA requires that the management application be installed on the same 
network as your VVX 1500 phones are connected.