Polycom 1725-11530-310 ユーザーズマニュアル

 Configuring Your System

4 - 79

Configuration changes can performed centrally at the boot server or locally:

The SoundPoint IP phones can be configured to generate various quality 

metrics for listening and conversational quality. These metrics can be sent 

between the phones in RTCP XR packets. The metrics can also be downloaded 

in SIP messages to a central voice quality report collector. The collection of 

these metrics is supported on the SoundPoint IP 330/320, 430, 501, 550, 560, 
600, 601, 650, and 670 phones and the SoundStation IP 4000 phone.

The RTCP XR packets are complaint with RFC 3611 - RTP Control Extended 

Reports (RTCP XR). The packets are sent to a report collector as specified in 

draft RFC draft-ietf_sipping_rtcp-summary-02. 
Three types of quality reports can be enabled:

• Alert—Generated when the call quality degrades below a configurable 

threshold.

• Periodic—Generated during a call at a configurable period.

• Session—Generated at the end of a call.

Configuration file: 
sip.cfg

Specify default and protocol-specific 802.1p/Q settings.

For more information, refer to 

 on page 

Web Server

(if enabled)

Specify 802.1p/Q settings. 

Navigate to http://<phoneIPAddress>/netConf.htm#qo

Local Phone User 
Interface

Specify whether CDP is to be used or manually set the VLAN ID or 
configure DHCP VLAN Discovery.

Phase 1: bootRom - Navigate to: SETUP menu during auto-boot 
countdown.

Phase 2: Application - Navigate to: 
Menu>Settings>Advanced>Admin Settings>Network 
Configuration

For more information, refer to 

 on page 

This feature requires a license key for activation. Using this feature may require 
purchase of a license key or activation by Polycom channels. For more information, 
contact your Certified Polycom Reseller.

Voice Quality Monitoring is not supported on the SoundStation IP 6000 and 7000 
conference phones at this time.